http://pm5d.forumotion.com/feed/? Latest topics Tue, 24 Nov 2009 12:21:18 GMT 10 http://i18.servimg.com/u/f18/11/73/61/32/logo10.gif http://pm5d.forumotion.com/feed/? http://pm5d.forumotion.com/general-pm5d-f3/using-scenes-t50.htm JoshScott I used a PM5d for the first time for a musical. Just wondering how you guys set up your scenes. I mainly do music and don't use multiple scenes very often. Do you have any advice or tips that you have learned. General PM5D Tue, 17 Mar 2009 00:43:43 GMT http://pm5d.forumotion.com/general-pm5d-f3/using-scenes-t50.htm#95 http://pm5d.forumotion.com/general-pm5d-f3/using-scenes-t50.htm http://pm5d.forumotion.com/wireless-5d-f1/wireless-usb-for-studio-manager-t34.htm RogerPhillip Anyone tried using this interface? Eliminating the host computer and using a usb receiver plugged in to the console would be nice if it would work. Wireless 5D Wed, 20 Aug 2008 01:05:16 GMT http://pm5d.forumotion.com/wireless-5d-f1/wireless-usb-for-studio-manager-t34.htm#59 http://pm5d.forumotion.com/wireless-5d-f1/wireless-usb-for-studio-manager-t34.htm http://pm5d.forumotion.com/pm5d-venues-f8/tulsa-performing-arts-center-tulsa-ok-t10.htm JCBigler 1x PM5D-RH in the Williams Theatre. PM5D Venues Thu, 29 Nov 2007 06:01:02 GMT http://pm5d.forumotion.com/pm5d-venues-f8/tulsa-performing-arts-center-tulsa-ok-t10.htm#13 http://pm5d.forumotion.com/pm5d-venues-f8/tulsa-performing-arts-center-tulsa-ok-t10.htm http://pm5d.forumotion.com/rent-hire-f7/off-the-wall-sound-t61.htm dougcvaudio 1 - O1V96

Off The Wall Sound
95 NE 179th St
Miami, Florida 33162
(305) 652-5002
(305) 652-5152 fax
www.offthewallsound.com]]> Rent/Hire Mon, 10 Aug 2009 19:25:02 GMT http://pm5d.forumotion.com/rent-hire-f7/off-the-wall-sound-t61.htm#113 http://pm5d.forumotion.com/rent-hire-f7/off-the-wall-sound-t61.htm http://pm5d.forumotion.com/general-pm5d-f3/patch-settings-in-scene-recall-t51.htm bubba_b I'm a relatively new user to the 5D and have an issue with scene save settings. As far as I can see, the board I'm using is setup to record all settings for scene save, but when I recall a scene, the in/out patching (ex: dir outs in Slot-1 w/ an Aviom card) isn't recalled. Changes to patching seem to occur globally and independent of scene save and recall. How do I change this so patching is saved and recalled with each scene? General PM5D Thu, 23 Apr 2009 19:49:29 GMT http://pm5d.forumotion.com/general-pm5d-f3/patch-settings-in-scene-recall-t51.htm#99 http://pm5d.forumotion.com/general-pm5d-f3/patch-settings-in-scene-recall-t51.htm http://pm5d.forumotion.com/general-pm5d-f3/foh-moh-without-splitterour-idea-t67.htm FBpro Hi! We have PM5D ,PM5D-RH and MY-cards Ethersound . Common situation -PM5D - FOH, PM5D-RH - MOH..The idea is-to connect both mixers without splitter...In this case stage signals are routed to the MOH -mixer ,that produces it's monitor mixes .Then,from direct out/pre-HPF of each MOH channel signals are sent through MY-cards to the FOH mixer by Ethersound.Then,FOH mix returns through the same MY-cards by Ethersound directly to corresponding OMNI-outs of the MOH-mixer. By the way analog HA gain ... General PM5D Tue, 24 Nov 2009 12:21:18 GMT http://pm5d.forumotion.com/general-pm5d-f3/foh-moh-without-splitterour-idea-t67.htm#122 http://pm5d.forumotion.com/general-pm5d-f3/foh-moh-without-splitterour-idea-t67.htm http://pm5d.forumotion.com/rent-hire-f7/yamaha-m7cl32-availalble-in-zagreb-croatia-t66.htm klokan ALSO AVAILABLE...1 YAMAHA M7CL 32]]> Rent/Hire Tue, 17 Nov 2009 13:30:14 GMT http://pm5d.forumotion.com/rent-hire-f7/yamaha-m7cl32-availalble-in-zagreb-croatia-t66.htm#121 http://pm5d.forumotion.com/rent-hire-f7/yamaha-m7cl32-availalble-in-zagreb-croatia-t66.htm http://pm5d.forumotion.com/rent-hire-f7/pm5drh-available-for-sub-hire-in-croatia-t65.htm klokan Please contact:

Eventus Productions l.t.d
Mr Marijo suica
+38598247052
marijo@eventuspro.hr]]> Rent/Hire Tue, 17 Nov 2009 13:22:15 GMT http://pm5d.forumotion.com/rent-hire-f7/pm5drh-available-for-sub-hire-in-croatia-t65.htm#120 http://pm5d.forumotion.com/rent-hire-f7/pm5drh-available-for-sub-hire-in-croatia-t65.htm http://pm5d.forumotion.com/general-pm5d-f3/problems-with-patch-mixbus-t63.htm XLRM I have a question; I had to make a recording and decided to do it from mixbus 1&2. So on every chanel I've put mixbus 1&2 on 0db. (post fader) The guitar was soft patched from the original input channel 12 to the channels 15&16.(to create a little stereo delay) When I listened to the recording I've heard everything but the guitar. Strangely enough i could hear the guitar loud and clear in the room where I was mixing from the speakers and also the fx of the guitar (ch 15,16) ... General PM5D Wed, 21 Oct 2009 20:48:24 GMT http://pm5d.forumotion.com/general-pm5d-f3/problems-with-patch-mixbus-t63.htm#117 http://pm5d.forumotion.com/general-pm5d-f3/problems-with-patch-mixbus-t63.htm http://pm5d.forumotion.com/general-pm5d-f3/pairing-chanels-t64.htm XLRM Any one knows why this is?]]> General PM5D Wed, 21 Oct 2009 20:52:41 GMT http://pm5d.forumotion.com/general-pm5d-f3/pairing-chanels-t64.htm#118 http://pm5d.forumotion.com/general-pm5d-f3/pairing-chanels-t64.htm http://pm5d.forumotion.com/general-pm5d-f3/replacing-a-fader-t62.htm JoshScott Has anyone replace a fader on a 5d. How hard is it? We have one fader that wiggles trying to find its place when you switch layers. Tried recalibrating the faders but didn't fix the problem. Yamaha told me it needed a new fader. General PM5D Mon, 21 Sep 2009 18:35:59 GMT http://pm5d.forumotion.com/general-pm5d-f3/replacing-a-fader-t62.htm#116 http://pm5d.forumotion.com/general-pm5d-f3/replacing-a-fader-t62.htm http://pm5d.forumotion.com/general-pm5d-f3/ls9-control-of-pm5d-dsp5d-t21.htm Mr.X So, playing around today with controlling the 5D from an LS9. It's useable, but still missing some major features. Thought I would start a thread about it and list what I know can be controlled so far and what cannot. Maybe others can add to the list and look at workarounds? I haven't checked out all functions so this is just a preliminary list... Controllable: - Faders 1-48 and Stereo 1-4 - Channel On/Off - EQ - all parameters EXCEPT HPF on/off and Type I/II. HPF frequency works, ... General PM5D Fri, 04 Jan 2008 05:01:49 GMT http://pm5d.forumotion.com/general-pm5d-f3/ls9-control-of-pm5d-dsp5d-t21.htm#33 http://pm5d.forumotion.com/general-pm5d-f3/ls9-control-of-pm5d-dsp5d-t21.htm http://pm5d.forumotion.com/general-pm1d-f6/pm1d-rs232-communication-protocol-t60.htm ghibson someone know the rs232 port communication protocol of pm1d?
Thk
Alessandro]]> General PM1D Wed, 22 Jul 2009 16:09:12 GMT http://pm5d.forumotion.com/general-pm1d-f6/pm1d-rs232-communication-protocol-t60.htm#112 http://pm5d.forumotion.com/general-pm1d-f6/pm1d-rs232-communication-protocol-t60.htm http://pm5d.forumotion.com/wireless-5d-f1/using-modbook-to-remote-control-pm5d-t59.htm Spectron Does anyone have experience with using a Modbook to wirelessly connect to a PM5D? Wireless 5D Tue, 14 Jul 2009 19:13:29 GMT http://pm5d.forumotion.com/wireless-5d-f1/using-modbook-to-remote-control-pm5d-t59.htm#111 http://pm5d.forumotion.com/wireless-5d-f1/using-modbook-to-remote-control-pm5d-t59.htm http://pm5d.forumotion.com/wireless-5d-f1/alternative-remote-devices-t56.htm moreinputz
Thanks for the reply....]]> Wireless 5D Mon, 22 Jun 2009 03:21:06 GMT http://pm5d.forumotion.com/wireless-5d-f1/alternative-remote-devices-t56.htm#107 http://pm5d.forumotion.com/wireless-5d-f1/alternative-remote-devices-t56.htm http://pm5d.forumotion.com/wireless-5d-f1/wireless-5d-t45.htm Hearudude Tanks,Ira
Do I need a tablet? I am only doing a little tweaking to an already great mix for monitors.]]> Wireless 5D Mon, 12 Jan 2009 03:11:41 GMT http://pm5d.forumotion.com/wireless-5d-f1/wireless-5d-t45.htm#80 http://pm5d.forumotion.com/wireless-5d-f1/wireless-5d-t45.htm http://pm5d.forumotion.com/rent-hire-f7/asr-pro-events-t55.htm Gerry Tacker 800 Waterway Place
Longwood Fl. 32750
407 767 5776 EXT 110
gerry@asrproevents.com

RH and non RH]]> Rent/Hire Mon, 15 Jun 2009 21:05:03 GMT http://pm5d.forumotion.com/rent-hire-f7/asr-pro-events-t55.htm#104 http://pm5d.forumotion.com/rent-hire-f7/asr-pro-events-t55.htm http://pm5d.forumotion.com/wireless-5d-f1/pm5d-and-blackberry-t54.htm Maximumdb Is it possible to use the PM5D with a Blackberry Pearl? Wireless 5D Tue, 19 May 2009 23:04:17 GMT http://pm5d.forumotion.com/wireless-5d-f1/pm5d-and-blackberry-t54.htm#103 http://pm5d.forumotion.com/wireless-5d-f1/pm5d-and-blackberry-t54.htm http://pm5d.forumotion.com/pm5d-venues-f8/cirque-du-soleil-zed-tokyo-theatre-t53.htm Jovai Monitor 2 x PM5D V2
DNE64 (many)
1 x O2R 96
1 x DM2000
4 x O1V96]]> PM5D Venues Fri, 01 May 2009 12:07:18 GMT http://pm5d.forumotion.com/pm5d-venues-f8/cirque-du-soleil-zed-tokyo-theatre-t53.htm#102 http://pm5d.forumotion.com/pm5d-venues-f8/cirque-du-soleil-zed-tokyo-theatre-t53.htm http://pm5d.forumotion.com/general-pm5d-f3/direct-outs-and-mutes-t52.htm bubba_b I'm wanting the direct outs to be unaffected by mute groups. I'm using the direct outs to feed an Aviom card and want to be able to use mute groups without them also muting the Avioms, just as you would on an analog board by setting the mutes to be post-aux/pre-fader. The direct out points are set for pre-fader so I'm not sure why they're being muted and I can't find anything in the manual that tells me where the mutes are effective in the signal chain. Any help? General PM5D Thu, 23 Apr 2009 20:25:27 GMT http://pm5d.forumotion.com/general-pm5d-f3/direct-outs-and-mutes-t52.htm#100 http://pm5d.forumotion.com/general-pm5d-f3/direct-outs-and-mutes-t52.htm http://pm5d.forumotion.com/general-pm5d-f3/assigning-direct-out-to-2-x-card-slots-t26.htm nickpnz
I was using a Avoim output card with a PM5D-RH and had it in slot 3. In slot 2 was an Analogue 8ch output card. I had channel 1 routed to Slot 2-1. I also had it assigned to Slot 3-1. Only audio out slot 2. Selected the channel showed direct output was slot 2-1. Is it possible to assign to both slot 2 and 3 at the same time?

cheers]]> General PM5D Sat, 17 May 2008 08:31:54 GMT http://pm5d.forumotion.com/general-pm5d-f3/assigning-direct-out-to-2-x-card-slots-t26.htm#47 http://pm5d.forumotion.com/general-pm5d-f3/assigning-direct-out-to-2-x-card-slots-t26.htm http://pm5d.forumotion.com/wireless-5d-f1/wirelessly-controlling-pm5d-t28.htm danny_01 I'm looking to be able to remotely control the 5D an M7 using a macbook and a dell x51 through a Linksys Wireless hub .
My mac has windows xp pro on it but I'd like to keep it on osx if at all possible, how would i go about setting this up,
cheers]]> Wireless 5D Wed, 30 Jul 2008 17:07:49 GMT http://pm5d.forumotion.com/wireless-5d-f1/wirelessly-controlling-pm5d-t28.htm#52 http://pm5d.forumotion.com/wireless-5d-f1/wirelessly-controlling-pm5d-t28.htm http://pm5d.forumotion.com/general-pm5d-f3/stereo-iem-and-fastest-way-to-do-pan-t48.htm KM can anyone tell what is the fastest way to do 6 groups stereo IEM:s? What kind of setting do I need that all groups follow my so called Master page? Now I must do PAN on each group individually. I do every group after fader because we got plenty dynamical stuff on stage,but major problem is panorate things during the show from master page. Is it even possible?

Thank you in advance!

Kalbor]]> General PM5D Tue, 24 Feb 2009 16:08:43 GMT http://pm5d.forumotion.com/general-pm5d-f3/stereo-iem-and-fastest-way-to-do-pan-t48.htm#90 http://pm5d.forumotion.com/general-pm5d-f3/stereo-iem-and-fastest-way-to-do-pan-t48.htm http://pm5d.forumotion.com/general-pm5d-f3/pm5d-in-a-recording-studio-t49.htm unger Well guys, Everything is okay ? Well, i have an opportunity to buy a PM5D V2 , here im Brazil, and i already have a Tascam MX2424, with 24 channel analog board. I am work with Sound Designing for films, and obvious i do not need a console large than PM5D. Nowadays i´ve been using a small behringer console to record my foleys , and sound files for films i´ve been working. But , since i have a larger studio by now , I want to record entire bands. So i want to get this opportunity to ... General PM5D Fri, 27 Feb 2009 16:12:50 GMT http://pm5d.forumotion.com/general-pm5d-f3/pm5d-in-a-recording-studio-t49.htm#91 http://pm5d.forumotion.com/general-pm5d-f3/pm5d-in-a-recording-studio-t49.htm http://pm5d.forumotion.com/general-pm5d-f3/service-manual-anyone-t47.htm jfritz001 jfritz001@att.net]]> General PM5D Tue, 10 Feb 2009 16:06:10 GMT http://pm5d.forumotion.com/general-pm5d-f3/service-manual-anyone-t47.htm#89 http://pm5d.forumotion.com/general-pm5d-f3/service-manual-anyone-t47.htm http://pm5d.forumotion.com/general-pm5d-f3/pm5d-software-t44.htm tvaudioman
Was unable to find the PM5D software on the Yamaha website. Any help apprecitated. Will be on a PM5D next week for first time with 2 hours to set up.

thanks.]]> General PM5D Sat, 10 Jan 2009 19:03:41 GMT http://pm5d.forumotion.com/general-pm5d-f3/pm5d-software-t44.htm#79 http://pm5d.forumotion.com/general-pm5d-f3/pm5d-software-t44.htm http://pm5d.forumotion.com/general-pm5d-f3/pm5d-editor-version-1-t46.htm sounddude1 My PM5d console at work has not been updated with newer firmware. I would like to use the editor software on my laptop, however the V2 editor does not seem to work with a version 1 board. Any suggestions.....other than updating the console's firmware ? General PM5D Wed, 28 Jan 2009 00:47:44 GMT http://pm5d.forumotion.com/general-pm5d-f3/pm5d-editor-version-1-t46.htm#86 http://pm5d.forumotion.com/general-pm5d-f3/pm5d-editor-version-1-t46.htm http://pm5d.forumotion.com/general-pm5d-f3/new-to-pm5d-t43.htm tvaudioman
Is the PM5D basically like a scaled down PM1D?

24 mixes that can be variable or fixed, and can feed matrix or Stereo out, or go to a direct output. Thus treat the mixes like an aux or group and go from there?

Thanks -chad]]> General PM5D Sat, 10 Jan 2009 19:02:02 GMT http://pm5d.forumotion.com/general-pm5d-f3/new-to-pm5d-t43.htm#78 http://pm5d.forumotion.com/general-pm5d-f3/new-to-pm5d-t43.htm http://pm5d.forumotion.com/general-pm5d-f3/iem-setup-t36.htm bobthebuilder at th risk of sounding like an idiot...... how are you guys setting up your IEM mixes? General PM5D Wed, 17 Sep 2008 03:05:07 GMT http://pm5d.forumotion.com/general-pm5d-f3/iem-setup-t36.htm#61 http://pm5d.forumotion.com/general-pm5d-f3/iem-setup-t36.htm http://pm5d.forumotion.com/studio-manager-f2/screen-pm5d-in-studio-manager-t8.htm Denis I would like to be able to work in StudioManager to control my PM5D by having screens as those which I see on my PM5D
I use Tablett PC with Wifi to control my PM5D and it would be very pleasant to find the screen which one it practice to have under the eyes when one works directly on the console.
What do you think of this idea?
I wait your opinions impatiently.

Denis]]> Studio Manager Mon, 26 Nov 2007 22:08:02 GMT http://pm5d.forumotion.com/studio-manager-f2/screen-pm5d-in-studio-manager-t8.htm#9 http://pm5d.forumotion.com/studio-manager-f2/screen-pm5d-in-studio-manager-t8.htm http://pm5d.forumotion.com/general-pm5d-f3/gpi-rs232-rs422-etc-t41.htm wim234 Dear Guys, I#m am going to set up a new show with the following equipment: a PC running Ableton live My PM5D RH ScreenAV My user-define button sends a midi-note to play clips from ableton-live and to change scenes in the PM5D. What i have to figure out is how to send play, pause, next,... commands to an RS232 remotable device(wich controls my screenAV Videoplayback)(watch screenav.de). Did anyone try that? Maybe fader-start-things could work. Any ideas? thx ... General PM5D Fri, 05 Dec 2008 16:17:21 GMT http://pm5d.forumotion.com/general-pm5d-f3/gpi-rs232-rs422-etc-t41.htm#72 http://pm5d.forumotion.com/general-pm5d-f3/gpi-rs232-rs422-etc-t41.htm http://pm5d.forumotion.com/general-pm5d-f3/storing-libraries-question-t31.htm Darkshark Hello to all ! I just got a PM5D and have done 5 shows on it so far..... we just scaled down... I was on a PM1D for the last 3 years and we went to the 5D for size. My question.... almost every time I go to STORE a scene and use the OVERWRITE option, my HA library gets renamed to what ever the scene title is..... I only use 1 HA library and have it named the way I like it. Does anyone know the procedure for maintaining the naming scheme? This happens only on the HA library. Details PM5D-RH ... General PM5D Sun, 10 Aug 2008 21:30:16 GMT http://pm5d.forumotion.com/general-pm5d-f3/storing-libraries-question-t31.htm#55 http://pm5d.forumotion.com/general-pm5d-f3/storing-libraries-question-t31.htm http://pm5d.forumotion.com/general-pm5d-f3/updating-pm5d-rh-ad-in-stin-through-rs422-port-t42.htm stagecrafts Recently, I updated my PM5D-RH to the latest version. It did update the MAIN and the LCD, succesfully. While updating the AD IN/STIN, it Erased the previous version & then loaded the new software, BUT, when it was verifying the operation - the system "hanged" and nothing happened thereafter. I was forced to shut the power 'Off' of the desk and 'Re-start'. On re-starting the desk, I found all the AD IN/STIN versions going 'BLANK' as they were Erased and the new version never ... General PM5D Fri, 19 Dec 2008 17:51:19 GMT http://pm5d.forumotion.com/general-pm5d-f3/updating-pm5d-rh-ad-in-stin-through-rs422-port-t42.htm#73 http://pm5d.forumotion.com/general-pm5d-f3/updating-pm5d-rh-ad-in-stin-through-rs422-port-t42.htm http://pm5d.forumotion.com/wireless-5d-f1/wireless-with-i-phone-t40.htm Dano can it be done with an I-phone? any plans to if not? thanks Wireless 5D Wed, 19 Nov 2008 21:05:50 GMT http://pm5d.forumotion.com/wireless-5d-f1/wireless-with-i-phone-t40.htm#70 http://pm5d.forumotion.com/wireless-5d-f1/wireless-with-i-phone-t40.htm http://pm5d.forumotion.com/wireless-5d-f1/vnc-t39.htm 101010 WHAT SOFTWARE DO I NEED TO USE THE PALM REMOTELY , VNC AND SOMETHING ELSE? Wireless 5D Sat, 08 Nov 2008 18:25:59 GMT http://pm5d.forumotion.com/wireless-5d-f1/vnc-t39.htm#68 http://pm5d.forumotion.com/wireless-5d-f1/vnc-t39.htm http://pm5d.forumotion.com/general-pm5d-f3/yamaha-ls9-t38.htm baez110984 Do anybody know how can I group channels in the ls9, because I want to have assign channels into groups but I don't know how. General PM5D Tue, 21 Oct 2008 00:30:30 GMT http://pm5d.forumotion.com/general-pm5d-f3/yamaha-ls9-t38.htm#63 http://pm5d.forumotion.com/general-pm5d-f3/yamaha-ls9-t38.htm http://pm5d.forumotion.com/general-pm5d-f3/multi-band-compressor-t37.htm AslanLyle I'm trying to use the M. Band Comp effect to do some frequency-specific compression and am having trouble figuring out how the thing works. Whenever I set the ratio to something greater than 1:1 (say 4:1), as I lower the threshold on a band it is increasing the volume in that band even when the input signal is way less than the threshold. It's looks like it's acting like an expander, but I can't quite figure it out. Has anyone used this effect? Can you give me some tips? I want it to behave ... General PM5D Thu, 02 Oct 2008 00:02:50 GMT http://pm5d.forumotion.com/general-pm5d-f3/multi-band-compressor-t37.htm#62 http://pm5d.forumotion.com/general-pm5d-f3/multi-band-compressor-t37.htm http://pm5d.forumotion.com/general-pm5d-f3/help-needed-configuring-virtual-soundcheck-t35.htm Justin Alfafara hey guys, is there anyone out there who has used the virtual soundcheck feature on the 5d? i have a show 3 days from now and i plan to record the performance in pro tools and then use the tracks for virtual soundcheck for the rest of the tour. can anyone help me by posting some sort of step by step procedure in configuring it? i don't own the console so i dont really have the luxury of trying it with the band before hitting the road neither do i have time to REALLY experiment at the venues. ... General PM5D Thu, 04 Sep 2008 18:05:35 GMT http://pm5d.forumotion.com/general-pm5d-f3/help-needed-configuring-virtual-soundcheck-t35.htm#60 http://pm5d.forumotion.com/general-pm5d-f3/help-needed-configuring-virtual-soundcheck-t35.htm http://pm5d.forumotion.com/general-pm5d-f3/watch-out-for-those-ps2-ports-t33.htm bbcamillo Just had our PM5d go crazy! Screen flickers,pairing mode changed from vertical to horizontal,patch jumbled, control surface frozen. It turned out to be PS2 mouse port with wireless mouse connected was loose and shorting out. Pretty crazy stuff. Caused by the regular bumping of the knee into the plugged in connector. I posted this in the Yahoo site also. Its good to back in this format instead. Bill General PM5D Sat, 16 Aug 2008 07:25:29 GMT http://pm5d.forumotion.com/general-pm5d-f3/watch-out-for-those-ps2-ports-t33.htm#57 http://pm5d.forumotion.com/general-pm5d-f3/watch-out-for-those-ps2-ports-t33.htm http://pm5d.forumotion.com/pm5d-venues-f8/horseshoe-t32.htm sc686868 2 pm5D`s @ Horseshoe Casino and Hotel, Bossier city LA. PM5D Venues Mon, 11 Aug 2008 00:14:04 GMT http://pm5d.forumotion.com/pm5d-venues-f8/horseshoe-t32.htm#56 http://pm5d.forumotion.com/pm5d-venues-f8/horseshoe-t32.htm http://pm5d.forumotion.com/general-pm5d-f3/new-here-t30.htm sc686868 JUst found this site. Looks like it can be alot of help. I`m the owner of 2 5D`s. General PM5D Sun, 10 Aug 2008 14:04:03 GMT http://pm5d.forumotion.com/general-pm5d-f3/new-here-t30.htm#54 http://pm5d.forumotion.com/general-pm5d-f3/new-here-t30.htm http://pm5d.forumotion.com/pm5d-venues-f8/orange-county-performing-arts-center-t29.htm OCPAC 2 x PM 5D RH FOH Concert Hall
1 x PM 5D RH FOH Samueli Theater

Depending on FOH use, PM 5D RH for Mons.
Midas XL-3 with sidecar, Mons
Midas H-1000

www.ocpac.org]]> PM5D Venues Sun, 03 Aug 2008 19:47:02 GMT http://pm5d.forumotion.com/pm5d-venues-f8/orange-county-performing-arts-center-t29.htm#53 http://pm5d.forumotion.com/pm5d-venues-f8/orange-county-performing-arts-center-t29.htm http://pm5d.forumotion.com/general-pm5d-f3/new-pm5d-firmware-and-editor-t27.htm JP
http://www.yamahaproaudio.com/downloads/firm_soft/index.html]]> General PM5D Mon, 14 Jul 2008 19:25:31 GMT http://pm5d.forumotion.com/general-pm5d-f3/new-pm5d-firmware-and-editor-t27.htm#51 http://pm5d.forumotion.com/general-pm5d-f3/new-pm5d-firmware-and-editor-t27.htm http://pm5d.forumotion.com/wireless-5d-f1/pm5d-wireless-t6.htm ange What hardware is required?
How does the laptop see the tablet?
I do have the laptop and tablet.]]> Wireless 5D Sun, 25 Nov 2007 18:30:43 GMT http://pm5d.forumotion.com/wireless-5d-f1/pm5d-wireless-t6.htm#6 http://pm5d.forumotion.com/wireless-5d-f1/pm5d-wireless-t6.htm http://pm5d.forumotion.com/general-m7cl-f5/proud-owners-of-an-m7-t23.htm F & G Sound Aaron with F and G Sound here- We are a full production company located in Urbana, IL. We have an M7 available for rent, wireless router available upon request. We could even rent you a pair if the need be! If anyone has any questions about this console, feel free to post. We've been working on using this console to its full capacity and may have some answers to any question(s) you may have about it. Ain't digital just grand.... General M7CL Fri, 22 Feb 2008 22:19:31 GMT http://pm5d.forumotion.com/general-m7cl-f5/proud-owners-of-an-m7-t23.htm#41 http://pm5d.forumotion.com/general-m7cl-f5/proud-owners-of-an-m7-t23.htm http://pm5d.forumotion.com/general-pm1d-f6/pm1d-pm5d-t25.htm Guillaume_ing_on_tour who can help me
thk
guillaume]]> General PM1D Tue, 15 Apr 2008 13:53:06 GMT http://pm5d.forumotion.com/general-pm1d-f6/pm1d-pm5d-t25.htm#46 http://pm5d.forumotion.com/general-pm1d-f6/pm1d-pm5d-t25.htm http://pm5d.forumotion.com/general-pm5d-f3/some-of-my-faders-are-slow-t24.htm StevanLigorio Guys, I am having an issue regarding faders that are slow to respond. They are sticky. I have spoken with tech support and have opened the faders, cleaned the stainless steel rods which support the rubbing block and re-lubed with MCL. This works on some faders but not always. It seems that the faders which tend to be slow get worse after a few up/down cycles (maybe the motor is warm and weak?). Does anyone else have this problem? Does anyone know if the motor on the fader is available ... General PM5D Wed, 02 Apr 2008 15:18:20 GMT http://pm5d.forumotion.com/general-pm5d-f3/some-of-my-faders-are-slow-t24.htm#44 http://pm5d.forumotion.com/general-pm5d-f3/some-of-my-faders-are-slow-t24.htm http://pm5d.forumotion.com/studio-manager-f2/sync-studio-manager-t13.htm marcylab i have a big problem in the sync process because my notebook recognize the usb-midi but only doit untill 95%i
i reseted the pm5d rh but still the problem
thanks for help]]> Studio Manager Fri, 30 Nov 2007 05:34:08 GMT http://pm5d.forumotion.com/studio-manager-f2/sync-studio-manager-t13.htm#17 http://pm5d.forumotion.com/studio-manager-f2/sync-studio-manager-t13.htm http://pm5d.forumotion.com/general-pm5d-f3/loading-libraries-from-memory-cards-t22.htm RogerPhillip I have loaded separate files on my memory card for input patch; GEQ settings etc. Now what? What happens to them when I bring them back in to the console. Do they load in to the current scene? Are they planted back in the respective libraries? I can't seem to find them when I re-load them. Here's the situation. When a outside engineer loads his show in to my PM5D I need to re-create my output routings and GEQ settings for my mains and floor-fills which are driven from the matrix, and derive ... General PM5D Fri, 18 Jan 2008 17:34:33 GMT http://pm5d.forumotion.com/general-pm5d-f3/loading-libraries-from-memory-cards-t22.htm#36 http://pm5d.forumotion.com/general-pm5d-f3/loading-libraries-from-memory-cards-t22.htm http://pm5d.forumotion.com/rent-hire-f7/rcs-corporation-t20.htm jfritz001 Cleveland, Ohio
jfritz (at) rcscorp (dot) cc
John Fritz
216-281-6600

4) PM5D RH]]> Rent/Hire Fri, 28 Dec 2007 17:36:26 GMT http://pm5d.forumotion.com/rent-hire-f7/rcs-corporation-t20.htm#31 http://pm5d.forumotion.com/rent-hire-f7/rcs-corporation-t20.htm