Assigning direct out to 2 x card slots

View previous topic View next topic Go down

Assigning direct out to 2 x card slots

Post  nickpnz on Sat May 17, 2008 2:31 am

Hi

I was using a Avoim output card with a PM5D-RH and had it in slot 3. In slot 2 was an Analogue 8ch output card. I had channel 1 routed to Slot 2-1. I also had it assigned to Slot 3-1. Only audio out slot 2. Selected the channel showed direct output was slot 2-1. Is it possible to assign to both slot 2 and 3 at the same time?

cheers

nickpnz

Posts : 4
Join date : 2008-05-17

View user profile

Back to top Go down

card slots

Post  nickpnz on Mon May 26, 2008 1:25 pm

Anyone had similar problems?

nickpnz

Posts : 4
Join date : 2008-05-17

View user profile

Back to top Go down

Re: Assigning direct out to 2 x card slots

Post  bubba_b on Thu Apr 23, 2009 1:30 pm

As far as I know, you should be able to route a single channel to more than one output, you just can't route more than one channel to a single output. However, the manual doesn't say anything about allowing this for direct outs.

bubba_b

Posts : 3
Join date : 2009-04-23

View user profile

Back to top Go down

Re: Assigning direct out to 2 x card slots

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum