Patch Settings in Scene Recall

View previous topic View next topic Go down

Patch Settings in Scene Recall

Post  bubba_b on Thu Apr 23, 2009 1:49 pm

I'm a relatively new user to the 5D and have an issue with scene save settings. As far as I can see, the board I'm using is setup to record all settings for scene save, but when I recall a scene, the in/out patching (ex: dir outs in Slot-1 w/ an Aviom card) isn't recalled. Changes to patching seem to occur globally and independent of scene save and recall. How do I change this so patching is saved and recalled with each scene?

bubba_b

Posts : 3
Join date : 2009-04-23

View user profile

Back to top Go down

Re: Patch Settings in Scene Recall

Post  Jovai on Sun Apr 26, 2009 12:50 am

HI!
go to the output patch and salve your new patch... after this dont forget... link on in input patch library / output patch library.
avatar
Jovai

Posts : 3
Join date : 2009-04-26
Age : 42
Location : Tokyo - Japan

View user profile

Back to top Go down

Re: Patch Settings in Scene Recall

Post  Guest on Wed Nov 25, 2009 2:32 am

tnx for your advice

Guest
Guest


Back to top Go down

Re: Patch Settings in Scene Recall

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum