Direct Outs and Mutes

View previous topic View next topic Go down

Direct Outs and Mutes

Post  bubba_b on Thu Apr 23, 2009 2:25 pm

I'm wanting the direct outs to be unaffected by mute groups. I'm using the direct outs to feed an Aviom card and want to be able to use mute groups without them also muting the Avioms, just as you would on an analog board by setting the mutes to be post-aux/pre-fader. The direct out points are set for pre-fader so I'm not sure why they're being muted and I can't find anything in the manual that tells me where the mutes are effective in the signal chain. Any help?

bubba_b

Posts : 3
Join date : 2009-04-23

View user profile

Back to top Go down

mute groups

Post  hjnebus on Sat Dec 12, 2009 3:52 pm

Mute groups control channel on (yamahaspeak for mute), which judging by the block diagram in the back of the manual mutes headamp analog gain stage output. So i think you're SOL. Why not assign DCA mutes for the mix?

hjnebus

Posts : 12
Join date : 2009-12-09

View user profile

Back to top Go down

Re: Direct Outs and Mutes

Post  davyneill on Mon Jun 07, 2010 2:53 pm

if you set your Direct Outs to be prefader they will be unaffected by channel muting.

davyneill

Posts : 4
Join date : 2010-06-07
Location : UK

View user profile

Back to top Go down

Re: Direct Outs and Mutes

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum