Patch Settings in Scene Recall
2 posters
PM5D.org :: PM5D :: General PM5D
Page 1 of 1
Patch Settings in Scene Recall
I'm a relatively new user to the 5D and have an issue with scene save settings. As far as I can see, the board I'm using is setup to record all settings for scene save, but when I recall a scene, the in/out patching (ex: dir outs in Slot-1 w/ an Aviom card) isn't recalled. Changes to patching seem to occur globally and independent of scene save and recall. How do I change this so patching is saved and recalled with each scene?
bubba_b- Posts : 3
Join date : 2009-04-23
Re: Patch Settings in Scene Recall
HI!
go to the output patch and salve your new patch... after this dont forget... link on in input patch library / output patch library.
go to the output patch and salve your new patch... after this dont forget... link on in input patch library / output patch library.
Jovai- Posts : 3
Join date : 2009-04-26
Age : 49
Location : Tokyo - Japan
PM5D.org :: PM5D :: General PM5D
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|